PCB Manufacturing UK, etch TQFP PCB, Via Impedance PCB

If you've been looking for a PCB Manufacturing UK company then you've found the right site. Amongst our extensive PCB fabrication, assembly and prototyping services we also etch TQFP PCB products and employ Copper PAD plating process HASL PCB fabrication and the PCB lamination pouch method. In our designs we make use of PCB board stiffener FR4 in appropriate places to prevent cracks in flex PCBs. We produce , PCB RF power modules and AC/DC PCB power modules.This page also contains information here about Via Impedance

Via Impedance PCB, Ampacity Printed Circuit Trace Width Current

Via impedance should be as close as possible to that of the trace (the trace can be found by means of a PCB traces width calculator). The adjustment of Via impedance in PCBs can be achieved by adjusting the size of the via and the anti-pad. If a anti-pad is too large in comparison to a via barrel diameter then this will lead to the via being more inductive than capacitive. If the gap is too tight then the via capacitance will take over.

PCB RF power modules & AC/DC PCB power modules

From your CAD PCB schematic we can produce PCB RF power modules & AC/DC PCB power modules for you. Our testing procedure of materials is second to none. We test the maximum deflection printed circuit board and the printed circuit board mechanical stress that the products can stand.

[Site Map] [Home] [Contact] [Terms and Conditions} [Marine Equipment]
© Clarydon Electronic Services Limited UK
Unit 27 Strawberry Lane, Willenhall, West Midlands, WV13 3RS